 
                  EAP773
BE9300 Ceiling Mount Tri-Band Wi-Fi 7 Access Point
- BE9300 Tri-Band Wi-Fi 7: 5760 Mbps (6 GHz) + 2880 Mbps (5 GHz) + 574 Mbps (2.4 GHz). Buffering will no longer be a problem.†
- 1× 10G Port: Unlock the full potential of Wi-Fi 7.
- Clear 6 GHz Band: Brings cleaner and wider band resources to your Wi-Fi.
- 320 MHz Bandwidth: Up to 320 MHz bandwidth enables many more simultaneous transmissions at the fastest possible speeds.‡
- Low Latency and Interference: Multi-Link Operation, and Multi-RUs ensure high performance of your network.‡
- Advanced Functions:Supports centralized management, mesh, and AI roaming.△
Learn more about Omada Cloud SDN>
| Interface | 1× 10G Ethernet Port | 
|---|---|
| Button | Reset | 
| Power Supply | 802.3bt PoE or 12V/2.5A DC | 
| Max. Power Consumption | Support Smart Power Comsuption Management• 25.94 W (802.3bt, full functionality);• 22.57 W (12/2.5A, full functionality);• 23.4 W (802.3at decrease 6GHz Power);• 10.1 W (802.3af, radio off, only main chip and LAN working) | 
| Dimensions ( W x D x H ) | 8.7 × 8.7 × 1.3 in (220 × 220 × 32.5 mm) | 
| Antenna | • 2.4 GHz: 2× 3.0 dBi• 5 GHz: 2× 3.0 dBi • 6 GHz: 2× 3.0 dBi | 
| Bluetooth | 1 × 4.0 dBi, Bluetooth 5.2*Firmware update may be required. | 
| Mounting | Ceiling / Wall Mounting (Kits Included) | 
| Coverage | 140㎡(1500 ft²)§ | 
|---|---|
| Concurrent Clients | 380+** | 
| Wireless Standards | IEEE 802.11 a/b/g/n/ac/ax/be | 
| Frequency | 6 GHz, 5 GHz, and 2.4 GHz | 
| Signal Rate | 574 Mbps (2.4 GHz) + 4320 Mbps (5 GHz) + 5760 Mbps (6 GHz)† | 
| Wireless Functions | • MLO‡• 4K-QAM‡• MU-MIMO‡• HE320‡• Mesh△• BSS Coloring‡• OFDMA‡• Load Balance• Band Steering• Beamforming• Airtime Fairness• Multiple SSIDS:24(8 on each band)• Wireless Schedule• Reboot Schedule• QoS(WMM)• Rate Limit• Static IP/Dynamic IP• RADIUS Accounting• MAC Authentication | 
| Wireless Security | • Captive Portal Authentication△• Access Control• Maximum number of MAC Filter: 4,000• Wireless Isolation Between Clients• VLAN• Rogue AP Detection• WPA-Personal/Enterprise, WPA2-Personal/Enterprise, WPA3-Personal/Enterprise | 
| Transmission Power | < 25 dBm (2.4 GHz)< 25 dBm (5 GHz)< 23 dBm (6 GHz) | 
| Omada App | Yes | 
|---|---|
| Centralized Management | • Omada Cloud-Based Controller• Omada Hardware Controller (OC300)• Omada Hardware Controller (OC200)• Omada Software Controller | 
| Cloud Access | Yes. Require the use of an OC300, OC200, Omada Software Controller, or an Omada Cloud-Based Controller. | 
| Email Alerts | Yes | 
| LED ON/OFF Control | Yes | 
| Management MAC Access Control | Yes | 
| SNMP | v1, v2c, v3 | 
| System Logging Local/Remote Syslog | Yes | 
| Web-based Management | Yes | 
| Certification | CE, FCC, RoHS, IC | 
|---|---|
| Package Content | • EAP773• Installation Guide• Ceiling/Wall Mounting KitsNote: Power Adapter is NOT included. | 
| Environment | • Operating Temperature: 0 °C–40 °C (32 °F–104 °F);• Storage Temperature: -40 °C–70 °C (-40 °F–158 °F);• Operating Humidity: 10%–90% non-condensing;• Storage Humidity: 5%–90% non-condensing; | 
†Maximum wireless signal rates are the physical rates derived from IEEE Standard 802.11 specifications. The 320 MHz bandwidth is only available on the 6 GHz band. Simultaneously, the 320 MHz bandwidth on the 6 GHz band and 160 MHz bandwidth on the 5 GHz band may be unavailable in some regions/countries due to regulatory restrictions. Double channel width and speed refer to 320 MHz compared to 160 MHz for WiFi 6 routers. Actual wireless data throughput, wireless coverage, and connected devices are not guaranteed and will vary as a result of internet service provider factors, network conditions, client limitations, and environmental factors, including building materials, obstacles, volume and density of traffic, and client location.
‡Use of Wi-Fi 7 (802.11be), Wi-Fi 6 (802.11ax), and features including Multi-Link Operation (MLO), 320 MHz Bandwidth, 6 GHz, 4K-QAM, Multi-RUs, OFDMA, MU-MIMO and BSS Color requires clients to also support the corresponding features.
*Zero-Touch Provisioning and Auto Channel Selection and Power Adjustment require the use of Omada Cloud-Based Controller. Go to /ca/omada-cloud-based-controller/product-list/ to confirm which models are compatible with Omada Cloud-Based Controller.
**The actual capacity depends on the wireless environment and client traffic and is generally less than the maximum number of client connections.
△Omada Mesh, AI Roaming, Captive Portal, and Cloud Access require the use of an Omada SDN controller. Please refer to the User Guides of Omada SDN controllers for configuration methods.
 
             
                
             
                
             
                
             
            
           
            
           
            
          