How to replace the main brush cover for Tapo Robot Vacuum

Q&A of functional explanation or specification parameters

Atualizado09-16-2025 10:39:29 AM Number of views for this article

21110

O artigo aplica-se a:

Tapo RV50 Pro Omni

Replace the main brush every 6-12 months.

Step 1. Turn the robot vacuum over, then unlatch and remove the main brush cover.

Main brush cover on the back of Tapo RV50 Pro Omni.

Step 2. Replace with a new main brush cover and listen for a click to lock it in place.

Install new main brush cover of Tapo RV50 Pro Omni.

Step 1. Turn the robot vacuum over, then unlatch and remove the main brush cover.

Note: If you have installed the mopping attachment, uninstall it from the robot vacuum first.

Main brush cover on the back of Tapo RV30 Max Plus/RV30 Max/RV20 Max Plus/RV20 Max.

Step 2. Replace with a new main brush cover. Press on the main brush cover to lock it in place.

Install new main brush cover of Tapo RV30 Max Plus/RV30 Max/RV20 Max Plus/RV20 Max.

Este guia foi útil?

A sua resposta ajuda-nos a melhorar o nosso site.