_normal_20250208083722i.jpg)
1.0_100Mbps_WDM_Media_Converter_with_1-Port_PoE_3_normal_20220421031047u.jpg)
1.0_100Mbps_WDM_Media_Converter_with_1-Port_PoE_4_normal_20220421031123x.jpg)
1.0_100Mbps_WDM_Media_Converter_with_1-Port_PoE_05_normal_20220421031202r.jpg)
1.0_100Mbps_WDM_Media_Converter_with_1-Port_PoE_6_normal_20220421031217a.jpg)
_large_20250208083722d.jpg)
1.0_100Mbps_WDM_Media_Converter_with_1-Port_PoE_3_large_20220421031047l.jpg)
1.0_100Mbps_WDM_Media_Converter_with_1-Port_PoE_4_large_20220421031123f.jpg)
1.0_100Mbps_WDM_Media_Converter_with_1-Port_PoE_05_large_20220421031202a.jpg)
1.0_100Mbps_WDM_Media_Converter_with_1-Port_PoE_6_large_20220421031217d.jpg)
TL-FC111PB-20
10/100Mbps WDM Media Converter with 1-Port PoE
- Converts the data between fiber (optical signal) and copper (electric signal).
- Extends fiber distance up to 20 km.
- The 802.3af PoE output makes remote camera deployment easier and more convenient.
- WDM (Wave Division Multiplexing) technology enables to transmit and receive data over one single fiber strand instead of two.
- Wide operating temperature (0–50 ℃) with reliability.
- Auto-negotiation of Half-Duplex/Full-Duplex transfer mode.
What This Product Does
How This Product Works
TL-FC111PB-20 adopts WDM (wavelength division multiplexing) technology, helping send and receive data at a distance of up to 20 km with only a single mode fiber, which saves half of the cable deployment cost for customers. TL-FC111PB-20 transmits data at 1310 nm wavelength and receives data at 1550 nm wavelength on optical fiber. Therefore, the terminal device used in conjunction with the TL-FC111PB-20 should send data at a wavelength of 1550 nm and receive data at a wavelength of 1310 nm. TP-Link another media converter TL-FC111A-20 is one of the products that can cooperate with TL-FC111PB-20.
Other Features
Besides, this media converter can be used as a standalone device (no rack required) or used with TP-Link's TL-FC1420 rack for auto MDI/MDI-X in TX port in which duplex mode is automatically negotiated.
| Standards and Protocols | IEEE802.3, IEEE802.3i, IEEE802.3u |
|---|---|
| Interface | • 1× 10/100 Mbps PoE RJ45 port (Auto MDI/MDIX)• 1× 100 Mbps SC fiber port |
|---|---|
| Network Media | 100BASE-Tx: 2-pair UTP/STP of Cat. 5 or above (≤100 m) |
| Power Supply | 48 V/0.5 A |
| LED | PWR, Link/Act, PoE |
| Wave Length | 1310 nm TX, 1550 nm RX |
| Dimensions ( W x D x H ) | 3.7×2.9×1.1 in (94.5×73.0×27.0 mm) |
| Connector Type | • 1× 10/100 Mbps PoE RJ45 port• 1× 100 Mbps SC fiber port |
|---|---|
| Fiber Type | 9/125 μm single-mode fber (≤20 km) |
|---|---|
| Operating Temperature | 0–50 °C (32–122 °F) |
|---|---|
| Storage Temperature | -40–70 °C (-40–158 °F) |
| Operating Humidity | 10–90% RH non-condensing |
| Storage Humidity | 5–90% RH non-condensing |
| Package Content | • Media Converter TL-FC111PB-20• Power Adapter• Installation Guide |
|---|---|