Omada Access 5-Port Gigabit Switch with 1-Port PoE++ in and 4-Port PoE+ out
- Distancia PoE de hasta 200m, duplica la distancia de transmisión de la fuente PoE al dispositivo mediante el paso de PoE estándar. Ideal para cámaras y puntos de acceso de larga distancia sin pérdida de velocidad*
- 1 puerto RJ45 Gigabit PoE++ y 4 puertos de salida RJ45 Gigabit PoE+ (Admite un budget PoE de hasta 64 W**)
- Certificación IP66, resistente al exterior. Soporta las inclemencias del tiempo como el agua, polvo, rayos UV y rayos 6KV***, garantizando un funcionamiento estable.
- Fácil instalación. Fácil de montar en una pared o poste, kits de montaje incluidos.
- Integración con Omada en la nube. Accede a funcionalidades avanzadas como la gestión centralizada desde la nube, monitorización Avanzada, gestión multisitio y funciones como la lista de control de acceso (ACL), QoS y VLAN.
Más información sobre la tecnología PoE de TP-Link >
Más información sobre Omada Cloud SDN >

por PoE para Simplificar el Despliegue de Redes en Exteriores
de 5 Puertos con 1 Puerto PoE++ de entrada y 4 Puertos PoE+ de salida
Alimentado por PoE++/PoE+/PoE
Presupuesto PoE máx. de 64 W
con 4 puertos de salida PoE+**
PoE Gigabit hasta 200 m sin pérdida de velocidad
Puertos Gigabit completos
Instalación fácil en
poste o pared
Carcasa IP66 resistente al agua y a los rayos UV


| CARACTERÍSTICAS DE HARDWARE | |
|---|---|
| Interfaz | • 1× 10/100/1000 Mbps RJ45 PoE In Port (compliance with 802.3af/at/bt)• 4× 10/100/1000 Mbps RJ45 PoE Out Ports (compliance with 802.3af/at) |
| Medios de Red | • 10BASE-T: UTP category 3, 4, 5 cable (maximum 100m)• 100BASE-TX/1000Base-T: UTP category 5, 5e or 6 cable (maximum 100m) |
| Cantidad de Ventiladores | Fanless |
| Fuente de Alimentación | Obtain Power from 802.3af/at/bt PoE Source |
| Puertos PoE (RJ45) | • PoE In Port: Port 5, compliance with 802.3af/at/bt• PoE Out Ports: Ports 1-4, compliance with 802.3af/at• PoE Power Budget:-64W when powered by 802.3bt Type 4 (90W)-44W when powered by 802.3bt Type 3 (60W)-19W when powered by 802.3at-6W when powered by 802.3af• Fast PoE• Perpetual PoE |
| Dimensiones | 4.1 × 1.6 × 7.3 in (103.0 × 41.6 × 186.2 mm) |
| Surge Protection | ±6 kV |
| Consumo de Potencia Máximo | 71.05 W (when powered by 802.3bt Type 4 (90W)) |
| Disipación máxima de calor | 241.57 BTU/hr (when powered by 802.3bt Type 4 (90W)) |
| RENDIMIENTO | |
|---|---|
| Memoria del Buffer de Paquete | 4.1 Mbit |
| Jumbo Frame | 9 KB |
| Capacidad de Conmutación | 10 Gbps |
| Tasa de Reenvío de Paquetes | 7.44 Mpps |
| Tabla de Direcciones MAC | 8K |
| CARACTERÍSTICAS DE SOFTWARE | |
|---|---|
| Calidad de Servicio | • 802.1p CoS/DSCP priority• 8 priority queues• Priority Schedule Mode- SP (Strict Priority)- WRR (Weighted Round Robin)• Queue Weight Config• Bandwidth Control- Port/Flow-based Rating Limit• Smoother Performance• Storm Control- Multiple Control Modes(kbps/ratio)- Broadcast/Multicast/Unknown-Unicast Control |
| Características L2 y L2+ | • 32 IP IPv4/IPv6 Interface• Static Routing- 32 IPv4/IPv6 Static Routes• DHCP Server• DHCP Relay- DHCP Interface Relay- DHCP VLAN Relay• DHCP L2 Relay• Static ARP• Proxy ARP• Gratuitous ARP• Link Aggregation- Static link aggregation- 802.3ad LACP- Up to 8 aggregation groups and up to 8 portsper group• Spanning Tree Protocol- 802.1D STP- 802.1w RSTP- 802.1s MSTP- STP Security: TC Protect, BPDU Filter/Protect,Root Protect• Loopback Detection• Flow Control- 802.3x Flow Control• Mirroring- Port Mirroring- CPU Mirroring- One-to-One- Many-to-One- Flow-Based- Ingress/Egress/Both• Device Link Detect Protocol (DLDP)• 802.1ab LLDP/ LLDP-MED |
| Multicast L2 | • 511 IPv4, IPv6 shared multicast groups• IGMP Snooping- IGMP v1/v2/v3 Snooping- Fast Leave- IGMP Snooping Querier- Static Group Config• Multicast VLAN Registration (MVR)• Multicast Filtering• MLD Snooping- MLD v1/v2 Snooping- Fast Leave- MLD Snooping Querier- Static Group Config• Limited IP Multicast (256 profiles and 16 entries per profile) |
| Características Avanzadas | • Automatic Device Discovery†• Batch Configuration†• Batch Firmware Upgrading†• Intelligent Network Monitoring†• Abnormal Event Warnings†• Unified Configuration†• Reboot Schedule† |
| VLAN | • VLAN Group- Max. 4K VLAN Groups• 802.1Q tag VLAN• MAC VLAN: 12 Entries• Protocol VLAN• GVRP• Voice VLAN |
| Lista de Control de Acceso | • Support up to 230 entries• Time-Range- Time Slice- Week Time-Range- Absolute Time-Range- Holiday• Time-based ACL• MAC ACL- Source MAC- Destination MAC- VLAN ID- User Priority- Ether Type• IP ACL- Source IP- Destination IP- IP Protocol- TCP Flag- TCP/UDP Source Port- TCP/UDP Destination Port- DSCP/IP TOS• IPv6 ACL• Combined ACL• Rule Operation- Permit/Deny• Policy Action- Mirror- Rate Limit- Redirect- QoS Remark• ACL Rules Binding- Port Binding- VLAN Binding• Actions for flows- Mirror (to supported interface)- Redirect (to supported interface)- Rate Limit- QoS Remark |
| Seguridad | • Authentication, Authorization, Accounting (AAA)• 802.1X- Port-based authentication- MAC (Host) based authentication- Authentication Method includes PAP/EAP-MD5- MAB- Guest VLAN- Support Radius authentication and accountability• IP/IPv6-MAC Binding- 512 Binding Entries- DHCP Snooping- DHCPv6 Snooping- ARP Inspection- ND Detection• IP Source Guard- 253 Entries- Source IP+Source MAC• IPv6 Source Guard- 183 Entries- Source IPv6 Address+Source MAC• DoS Defend• Static/Dynamic/Permanent Port Security- Up to 64 MAC addresses per port• Broadcast/Multicast/Unicast Storm Control- kbps/ratio control mode• Port Isolation• Secure web management through HTTPS with SSLv3/TLS 1.2 • Secure Command Line Interface (CLI) management with SSHv1/SSHv2• IP/Port/MAC-based access control |
| IPv6 | • IPv6 Static Routing and ACL• IPv4/IPv6 Dual Stack• IPv6 Interface• Multicast Listener Discovery (MLD) Snooping• IPv6 neighbor discovery (ND)• Path maximum transmission unit (MTU) discovery• Internet Control Message Protocol (ICMP) version 6• TCPv6/UDPv6• IPv6 applications- DHCPv6 Client- Ping6- Tracert6- Telnet(v6)- IPv6 SNMP- IPv6 SSH- IPv6 SSL- Http/Https- IPv6 TFTP |
| MIBs | • MIB II (RFC1213)• Bridge MIB (RFC1493)• P/Q-Bridge MIB (RFC2674)• Radius Accounting Client MIB (RFC2620)• Radius Authentication Client MIB (RFC2618)• Remote Ping, Traceroute MIB (RFC2925)• Support TP-Link private MIBs• RMON MIB(RFC1757, rmon 1,2,3,9) |
| GESTIÓN | |
|---|---|
| Omada App | Yes. Requires the use of Omada Hardware Controller, Omada Cloud-Based Controller, or Omada Software Controller. |
| Gestión Centralizada | • Omada Cloud-Based Controller (Requires built-in version 5.15.22 or later)• Omada Hardware Controller (Requires built-in version 5.15.20 or later)• Omada Software Controller (Requires built-in version 5.15.20 or later) |
| Acceso a la nube | Yes. Requires the use of Omada Hardware Controller, Omada Cloud-Based Controller, or Omada Software Controller. |
| Aprovisionamiento sin contacto | Yes. Requiring the use of Omada Cloud-Based Controller. |
| Funciones de gestión | • Web-based GUI• Command Line Interface (CLI) through telnet• SNMPv1/v2c/v3• SNMP Trap/Inform• RMON (1,2,3,9 groups)• SDM Template• DHCP/BOOTP Client• Dual Image, Dual Configuration• CPU Monitoring• Cable Diagnostics• EEE• SNTP• System Log |
| Otros | |
|---|---|
| Certificaciones | CE, FCC, IP66 |
| Contenido del Paquete | • SG2005P-PD• Wall Mount Bracket• Pole Mount Strap• Wall Anchors• Screws• Installation Guide |
| Requisitos del sistema | Microsoft® Windows® 98SE, NT, 2000, XP, Vista™ or Windows 7/8/10/11, MAC® OS, NetWare®, UNIX® or Linux. |
| Factores Ambientales | • Operating Temperature: -40 to 60 °C (-40 to 140 °F)• Storage Temperature: -40 °C to 70 °C (-40 °F to 158 °F)• Operating Humidity: 10–90% RH non-condensing• Storage Humidity: 5–90% RH non-condensing |
*La distancia de transmisión real puede variar en función del consumo energético de los dispositivos alimentados por PoE o de la calidad y el tipo de cable.
**Admite una potencia de salida PoE de hasta 64 W / 44 W / 19 W / 6 W cuando se alimenta mediante PoE 802.3bt Tipo 4 (90 W), 802.3bt Tipo 3 (60 W), 802.3at y 802.3af, respectivamente. Los cálculos del presupuesto de PoE se basan en pruebas de laboratorio. El presupuesto de potencia PoE real no está garantizado y variará en función de las limitaciones del cliente y de factores ambientales.
***La protección contra rayos puede lograrse mediante una configuración adecuada del producto, la conexión a tierra y el apantallamiento de los cables. Consulte el manual de instrucciones y pida ayuda a un profesional de TI para configurar este producto.
†Estas funciones requieren el uso del controlador Omada. El aprovisionamiento sin intervención (Zero-Touch Provisioning) requiere el uso de Omada Central (Omada Central Standard u Omada Central Essentials). Acceda a la lista de productos de Omada Central Standard o a la lista de productos de Omada Central Essentials para consultar todos los modelos compatibles.
.