Omada Access 5-Port Gigabit Switch with 1-Port PoE++ in and 4-Port PoE+ out

  • Distancia PoE de hasta 200m, duplica la distancia de transmisión de la fuente PoE al dispositivo mediante el paso de PoE estándar. Ideal para cámaras y puntos de acceso de larga distancia sin pérdida de velocidad*
  • 1 puerto RJ45 Gigabit PoE++ y 4 puertos de salida RJ45 Gigabit PoE+ (Admite un budget PoE de hasta 64 W**)
  • Certificación IP66, resistente al exterior. Soporta las inclemencias del tiempo como el agua, polvo, rayos UV y rayos 6KV***, garantizando un funcionamiento estable.
  • Fácil instalación. Fácil de montar en una pared o poste, kits de montaje incluidos.
  • Integración con Omada en la nube. Accede a funcionalidades avanzadas como la gestión centralizada desde la nube, monitorización Avanzada, gestión multisitio y funciones como la lista de control de acceso (ACL), QoS y VLAN.

 

Más información sobre la tecnología PoE de TP-Link >

Más información sobre Omada Cloud SDN >​

 

Imagen principal
Switch PoE Alimentado
por PoE para Simplificar el Despliegue de Redes en Exteriores
Switch Gigabit Omada Access
de 5 Puertos con 1 Puerto PoE++ de entrada y 4 Puertos PoE+ de salida
SG2005P-PD

Alimentado por PoE++/PoE+/PoE

Presupuesto PoE máx. de 64 W  con 4 puertos de salida PoE+**

PoE Gigabit hasta 200 m sin pérdida de velocidad

Puertos Gigabit completos

Instalación fácil en
poste o pared

Carcasa IP66 resistente al agua y a los rayos UV

CARACTERÍSTICAS DE HARDWARE
Interfaz • 1× 10/100/1000 Mbps RJ45 PoE In Port (compliance with 802.3af/at/bt)
• 4× 10/100/1000 Mbps RJ45 PoE Out Ports (compliance with 802.3af/at)
Medios de Red • 10BASE-T: UTP category 3, 4, 5 cable (maximum 100m)
• 100BASE-TX/1000Base-T: UTP category 5, 5e or 6 cable (maximum 100m)
Cantidad de Ventiladores Fanless
Fuente de Alimentación Obtain Power from 802.3af/at/bt PoE Source
Puertos PoE (RJ45) • PoE In Port: Port 5, compliance with 802.3af/at/bt
• PoE Out Ports: Ports 1-4, compliance with 802.3af/at
• PoE Power Budget:
-64W when powered by 802.3bt Type 4 (90W)
-44W when powered by 802.3bt Type 3 (60W)
-19W when powered by 802.3at
-6W when powered by 802.3af
• Fast PoE
• Perpetual PoE
Dimensiones 4.1 × 1.6 × 7.3 in (103.0 × 41.6 × 186.2 mm)
Surge Protection ±6 kV
Consumo de Potencia Máximo 71.05 W (when powered by 802.3bt Type 4 (90W))
Disipación máxima de calor 241.57 BTU/hr (when powered by 802.3bt Type 4 (90W))
RENDIMIENTO
Memoria del Buffer de Paquete 4.1 Mbit
Jumbo Frame 9 KB
Capacidad de Conmutación 10 Gbps
Tasa de Reenvío de Paquetes 7.44 Mpps
Tabla de Direcciones MAC 8K
CARACTERÍSTICAS DE SOFTWARE
Calidad de Servicio • 802.1p CoS/DSCP priority
• 8 priority queues
• Priority Schedule Mode
- SP (Strict Priority)
- WRR (Weighted Round Robin)
• Queue Weight Config
• Bandwidth Control
- Port/Flow-based Rating Limit
• Smoother Performance
• Storm Control
- Multiple Control Modes(kbps/ratio)
- Broadcast/Multicast/Unknown-Unicast Control
Características L2 y L2+ • 32 IP IPv4/IPv6 Interface
• Static Routing
- 32 IPv4/IPv6 Static Routes
• DHCP Server
• DHCP Relay
- DHCP Interface Relay
- DHCP VLAN Relay
• DHCP L2 Relay
• Static ARP
• Proxy ARP
• Gratuitous ARP
• Link Aggregation
- Static link aggregation
- 802.3ad LACP
- Up to 8 aggregation groups and up to 8 ports
per group
• Spanning Tree Protocol
- 802.1D STP
- 802.1w RSTP
- 802.1s MSTP
- STP Security: TC Protect, BPDU Filter/Protect,
Root Protect
• Loopback Detection
• Flow Control
- 802.3x Flow Control
• Mirroring
- Port Mirroring
- CPU Mirroring
- One-to-One
- Many-to-One
- Flow-Based
- Ingress/Egress/Both
• Device Link Detect Protocol (DLDP)
• 802.1ab LLDP/ LLDP-MED
Multicast L2 • 511 IPv4, IPv6 shared multicast groups
• IGMP Snooping
- IGMP v1/v2/v3 Snooping
- Fast Leave
- IGMP Snooping Querier
- Static Group Config
• Multicast VLAN Registration (MVR)
• Multicast Filtering
• MLD Snooping
- MLD v1/v2 Snooping
- Fast Leave
- MLD Snooping Querier
- Static Group Config
• Limited IP Multicast (256 profiles and 16 entries per profile)
Características Avanzadas • Automatic Device Discovery†
• Batch Configuration†
• Batch Firmware Upgrading†
• Intelligent Network Monitoring†
• Abnormal Event Warnings†
• Unified Configuration†
• Reboot Schedule†
VLAN • VLAN Group
- Max. 4K VLAN Groups
• 802.1Q tag VLAN
• MAC VLAN: 12 Entries
• Protocol VLAN
• GVRP
• Voice VLAN
Lista de Control de Acceso • Support up to 230 entries
• Time-Range
- Time Slice
- Week Time-Range
- Absolute Time-Range
- Holiday
• Time-based ACL
• MAC ACL
- Source MAC
- Destination MAC
- VLAN ID
- User Priority
- Ether Type
• IP ACL
- Source IP
- Destination IP
- IP Protocol
- TCP Flag
- TCP/UDP Source Port
- TCP/UDP Destination Port
- DSCP/IP TOS
• IPv6 ACL
• Combined ACL
• Rule Operation
- Permit/Deny
• Policy Action
- Mirror
- Rate Limit
- Redirect
- QoS Remark
• ACL Rules Binding
- Port Binding
- VLAN Binding
• Actions for flows
- Mirror (to supported interface)
- Redirect (to supported interface)
- Rate Limit
- QoS Remark
Seguridad • Authentication, Authorization, Accounting (AAA)
• 802.1X
- Port-based authentication
- MAC (Host) based authentication
- Authentication Method includes PAP/EAP-MD5
- MAB
- Guest VLAN
- Support Radius authentication and accountability
• IP/IPv6-MAC Binding
- 512 Binding Entries
- DHCP Snooping
- DHCPv6 Snooping
- ARP Inspection
- ND Detection
• IP Source Guard
- 253 Entries
- Source IP+Source MAC
• IPv6 Source Guard
- 183 Entries
- Source IPv6 Address+Source MAC
• DoS Defend
• Static/Dynamic/Permanent Port Security
- Up to 64 MAC addresses per port
• Broadcast/Multicast/Unicast Storm Control
- kbps/ratio control mode
• Port Isolation
• Secure web management through HTTPS with SSLv3/TLS 1.2
• Secure Command Line Interface (CLI) management with SSHv1/SSHv2
• IP/Port/MAC-based access control
IPv6 • IPv6 Static Routing and ACL
• IPv4/IPv6 Dual Stack
• IPv6 Interface
• Multicast Listener Discovery (MLD) Snooping
• IPv6 neighbor discovery (ND)
• Path maximum transmission unit (MTU) discovery
• Internet Control Message Protocol (ICMP) version 6
• TCPv6/UDPv6
• IPv6 applications
- DHCPv6 Client
- Ping6
- Tracert6
- Telnet(v6)
- IPv6 SNMP
- IPv6 SSH
- IPv6 SSL
- Http/Https
- IPv6 TFTP
MIBs • MIB II (RFC1213)
• Bridge MIB (RFC1493)
• P/Q-Bridge MIB (RFC2674)
• Radius Accounting Client MIB (RFC2620)
• Radius Authentication Client MIB (RFC2618)
• Remote Ping, Traceroute MIB (RFC2925)
• Support TP-Link private MIBs
• RMON MIB(RFC1757, rmon 1,2,3,9)
GESTIÓN
Omada App Yes. Requires the use of Omada Hardware Controller, Omada Cloud-Based Controller, or Omada Software Controller.
Gestión Centralizada • Omada Cloud-Based Controller (Requires built-in version 5.15.22 or later)
• Omada Hardware Controller (Requires built-in version 5.15.20 or later)
• Omada Software Controller (Requires built-in version 5.15.20 or later)
Acceso a la nube Yes. Requires the use of Omada Hardware Controller, Omada Cloud-Based Controller, or Omada Software Controller.
Aprovisionamiento sin contacto Yes. Requiring the use of Omada Cloud-Based Controller.
Funciones de gestión • Web-based GUI
• Command Line Interface (CLI) through telnet
• SNMPv1/v2c/v3
• SNMP Trap/Inform
• RMON (1,2,3,9 groups)
• SDM Template
• DHCP/BOOTP Client
• Dual Image, Dual Configuration
• CPU Monitoring
• Cable Diagnostics
• EEE
• SNTP
• System Log
Otros
Certificaciones CE, FCC, IP66
Contenido del Paquete • SG2005P-PD
• Wall Mount Bracket
• Pole Mount Strap
• Wall Anchors
• Screws
• Installation Guide
Requisitos del sistema Microsoft® Windows® 98SE, NT, 2000, XP, Vista™ or Windows 7/8/10/11, MAC® OS, NetWare®, UNIX® or Linux.
Factores Ambientales • Operating Temperature: -40 to 60 °C (-40 to 140 °F)
• Storage Temperature: -40 °C to 70 °C (-40 °F to 158 °F)
• Operating Humidity: 10–90% RH non-condensing
• Storage Humidity: 5–90% RH non-condensing

*La distancia de transmisión real puede variar en función del consumo energético de los dispositivos alimentados por PoE o de la calidad y el tipo de cable.

**Admite una potencia de salida PoE de hasta 64 W / 44 W / 19 W / 6 W cuando se alimenta mediante PoE 802.3bt Tipo 4 (90 W), 802.3bt Tipo 3 (60 W), 802.3at y 802.3af, respectivamente. Los cálculos del presupuesto de PoE se basan en pruebas de laboratorio. El presupuesto de potencia PoE real no está garantizado y variará en función de las limitaciones del cliente y de factores ambientales.

***La protección contra rayos puede lograrse mediante una configuración adecuada del producto, la conexión a tierra y el apantallamiento de los cables. Consulte el manual de instrucciones y pida ayuda a un profesional de TI para configurar este producto.

†Estas funciones requieren el uso del controlador Omada. El aprovisionamiento sin intervención (Zero-Touch Provisioning) requiere el uso de Omada Central (Omada Central Standard u Omada Central Essentials). Acceda a la lista de productos de Omada Central Standard o a la lista de productos de Omada Central Essentials para consultar todos los modelos compatibles.

.