Скачать для Festa FS310GP
ВАЖНО:
Доступность модели и версии оборудования зависит от региона. Чтобы узнать о доступности продукта, посетите региональный веб-сайт TP-Link.
Vx.0=Vx.6/Vx.8/Vx.9 (например: V1.0=V1.6/V1.8/V1.9)
Vx.x0=Vx.x6/Vx.x8/Vx.x9 (например: V1.20=V1.26/V1.28/V1.29)
Vx.30=Vx.32/Vx.33 (например: V3.30=V3.32/V3.33)
Vx.0=Vx.6/Vx.8/Vx.9 (например: V1.0=V1.6/V1.8/V1.9)
Vx.x0=Vx.x6/Vx.x8/Vx.x9 (например: V1.20=V1.26/V1.28/V1.29)
Vx.30=Vx.32/Vx.33 (например: V3.30=V3.32/V3.33)
Файлы MIB
|
TP-Link_L2 Switch_MIB |
Скачать | |
|---|---|---|
| Дата публикации: 2024-02-29 | Язык: Английский | Размер файла: 199.18 KB |
Операционная система : Windows/Mac OS/Linux |
||
|
|
||
Видео по настройке
FAQ
- Как зарегистрировать продукт TP-Link, используя свой идентификатор TP-Link
- Как настроить 802.1Q VLAN на Smart и управляемых коммутаторах с новым интерфейсом?
- How to troubleshoot Festa Switches in the Standalone mode
- How to configure switch as DHCP server on Standalone mode
- Do you still have any doubt about the effect of QoS on the Switch of TP-Link?
- How to change the IP address of the smart and managed switches using the old GUI and CLI
- How to block an illegal client with Certain IP address from getting access to the network using TP-Link Managed Switches
- How to configure RSTP on TP-Link switches using the old GUI
- Why my PoE powered device cannot work properly when connected to the PoE Switch?
- В чём заключаются различия в функциях и способах применения различных серий коммутаторов?
- How to Configure Management VLAN on TP-Link Smart and Managed Switches Using the New GUI
- How to configure LACP on our Smart/ Managed Switch
- Как настроить IGMP Snooping для работы IPTV на управляемых коммутаторах 2‑го уровня с новым интерфейсом?
- Getting started with Festa Cloud-Based Controller
- Festa device adoption guidance
- Что делать, если не удаётся получить доступ к веб‑интерфейсу коммутатора TP‑Link?
- What should I do if my switch has no Internet access?
- What should I do if my Internet from switch is unstable?
- Typical CLI Configuration Examples for TP-Link JetStream Switch
- How to test the Jumbo Frame pass-through feature on TP-Link switches
- How to choose PoE switch
- How to check and modify VLANs on a TP-Link JetStream switch via SNMP
- How to achieve AAA Authentication through TACACS + server on the switch
- How to configure OpenSSH 7.0(and above) to login smart and managed switches?
From United States?
Получайте информацию о продуктах, событиях и услугах для вашего региона.