Can I cut the Tapo/Kasa strip?

Q1: Can I cut the Light Strip to fit my installation?

A1: Yes, the Light Strips have cut marks, allowing you to cut them to the desired length for your installation.

Note: Ensure the light strip is disconnected from power before cutting.

Q2: After cutting the Light strip, can I connect the excess part cut off to another controller for normal use?

A2: No. Currently, TP-Link does not sell the light strip controller separately. What’s more, Third-party controllers are not fully compatible with Tapo/Kasa light strips, which may prevent the strip from powering on or being controlled.

Q3: What can I do with the excess part of the Light strip after cutting?

A3: Generally, the excess part cut-off cannot be reused, so please be careful before cutting.

If you accidentally cut it to the wrong length, you can still reconnect the cut part using a connector or attach it to another strip of the same model. You can tap here for more guidance about using a connector.

Notes: The total length of most light strips must not exceed 5 meters, and the Tapo L901-6 must not exceed 6 meters.

(1) Exceeding the limit length may cause the overall brightness of the strip to dim.

(2) For the L930 and L920 models, the parts beyond 5 meters cannot change colors properly.